Zanussi ZRD 23 JC Livret d'instructions - Page 10

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Zanussi ZRD 23 JC. Zanussi ZRD 23 JC 17 pages. Combination

Imprimer la page

1. Technical Data

Technical data

Model

Gross capacity (l)

Net capacity (l)

Width (mm)

Height (mm)

Depth (mm)

Energy consumption (kWh/24h)

(kWh/year)

Energy class, according to EU standards

Freezing capacity (kg/24h)

Rising time (h)

Rated power (W)

Weight (kg)

Number of compressors

Installing the appliance

Transportation, unpacking

It is recommended to deliver the appliance in orig-

inal packaging, in vertical position considering the

protective warning on packaging.

After each transportation the appliance must not be

switched on for approx. 2 hours.

Unpack the appliance and check if there are damages on

it. Report possible damages immediately to the place you

bought it. In that case retain packaging.

Cleaning

Remove every adhesive tape, which ensure the parts not

to move in the appliance.

Wash the inside of the appliance using lukewarm water

and mild detergent. Use soft cloth.

After cleaning wipe out the inside of the appliance.

Placement

The ambient temperature has an effect on the energy

consumption and proper operation of the appliance.

When placing, take into consideration that it is practi- cal

to operate the appliance between ambient tem- perature

limits according to the climate class that is given in the

chart below and can be found in the data label.

Class of climate

If the ambient temperature goes below the lower data the

temperature of the cooling compartment can go beyond

the prescribed temperature.

Instructions for the Installer

Ambient temperature

+10 ... +32 °C

+16 ... +32 °C

+18 ... + 38 °C

ZRD 23 JC

Freezer:

Refrigerator: 190

Freezer:

Refrigerator: 186

545

1404

604

0,78

285

If the ambient temperature goes beyond the upper data

this means longer operating time of the compressor,

breakdown in the automatic defrosting increasing temper-

ature in the cooling compartment or increasing energy

consumption.

When placing the appliance ensure that it stands level.

This can be achieved by two adjustable feet (1) at the bot-

tom in front.