Zanussi 949499628 Manuel de l'utilisateur - Page 21
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi 949499628. Zanussi 949499628 29 pages.
Imprimer la page
CAUTION! If there are other
appliances installed in the same
cabinet, do not use them at the same
time as this function. It can cause
damage to the oven.
Turn off the oven and wait
until it is cold.
Step 1
Set the function:
Step 2
Turn the control knob (for the temperature) to set the cleaning mode.
Option
P1
P2
Step 3
- press to start the cleaning.
Step 4
After cleaning, turn the knob for the heating functions to the off position.
During the cleaning the oven lamp is off. The oven door stays locked. When the oven is cold, the
door unlocks.
When the oven is at the set temperature, the door locks. Until the door unlocks the display shows: the
bars of the heat indicator,
tions to the off position.
Turn off the oven and wait
until it is cold.
CLEANING REMINDER
The oven reminds you when to clean the oven with:
pyrolytic cleaning.
PYR - flashes in the display for 10 sec after each
activation and deactivation of the oven.
HOW TO REMOVE AND INSTALL: DOOR
The oven door has three glass panels. You can remove the oven door and the internal glass panels to clean
them. Read the whole "Removing and installing door" instruction before you remove the glass panels.
CAUTION! Do not use the oven without the glass panels.
Before the Pyrolysis:
Remove all accessories.
.
- flashes.
Cleaning mode
Light cleaning
Normal cleaning
. To stop cleaning before it is completed, turn the knob for the oven func-
When the cleaning ends:
Clean the cavity with a soft
cloth.
Clean the oven floor and the inner
door glass with warm water, a soft
cloth and a mild detergent.
Remove the residue from the bot-
,
- press at the same time to turn off the
reminder.
Duration
1 h 30 min
2 h 30 min
tom of the cavity.
21