Zanussi ZOF35661XK Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZOF35661XK. Zanussi ZOF35661XK 29 pages. Built-in double oven

Zanussi ZOF35661XK Manuel de l'utilisateur
Disconnect the appliance from the power supply before
carrying out any maintenance.
If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service Centre or
similarly qualified persons to avoid an electrical hazard.
The means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.
WARNING: Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric shock.
WARNING: The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching heating
elements.
Always use oven gloves to remove or put in accessories or
ovenware.
To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls. Install
the shelf supports in the opposite sequence.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the glass door since they can scratch the surface, which
may result in shattering of the glass.

SAFETY INSTRUCTIONS

INSTALLATION
WARNING! Only a qualified person
must install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Follow the installation instructions supplied with
the appliance.
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
Do not pull the appliance by the handle.
Install the appliance in a safe and suitable place
that meets installation requirements.
Keep the minimum distance from other
appliances and units.
Before mounting the appliance, check if the
oven door opens without restraint.
The appliance is equipped with an electric
cooling system. It must be operated with the
electric power supply.
The built-in unit must meet the stability
requirements of DIN 68930.
Cabinet minimum
height (Cabinet under
the worktop minimum
height)
Cabinet width
Cabinet depth
Height of the front of
the appliance
Height of the back of
the appliance
(720) mm
600-605 mm
550 mm
715 mm
708 mm
3