Zanussi FE804 Manuel de l'utilisateur - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi FE804. Zanussi FE804 22 pages. Washing machine fe 804

Imprimer la page

Pay attention to the level and temperature of the

water in the washing machine!

When you close the door and press the ON/OFF

button again, the washing machine will resume the

programme from the point where it had been

interrupted.

13. End of programme

At the end of the programme, the washing machine

stops automatically and gives an audible signal.

If the RINSE HOLD

has been selected, the light

of the START/PAUSE button

goes off, the door

is locked, the pilot lights

and

remain lit, to

indicate that the water must be drained.

When the programme has been completed the

audible signal is given.

Press the SKIP/RESET button repeatedly to

erase the programme that has just been carried

out. If you omit to do this, the next time you

switch the washing machine on, you will hear the

audible signal.

Note: when you switch the machine on, if you must

erase the previously performed programme, it is

also sufficient to press the FABRIC button

and

select a new programme.

Press the ON/OFF button to switch the machine off.

The relevant light will go out.

Remove the laundry from the washing machine.

Check whether the drum is completely empty, by

rotating it with your hand. The purpose of this is to

prevent any items of laundry from remaining

accidentally in the drum, where they might get

damaged in a subsequent wash (e.g. by shrinking)

or bleed colour into another load of laundry.

We advise you to close the water supply tap and

disconnect the plug from the socket.

Leave the door ajar in order to air the washing

machine.