Zanussi ZWT 12120 Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZWT 12120. Zanussi ZWT 12120 24 pages. Top-loading washing machine
Imprimer la page
Selecting the temperature
Press the "Temperature"
pushbutton repeatedly to
increase or decrease the
temperature if you want
your washing to be washed
at a different temperature to
the one selected by the ap-
pliance. The
means a cold wash.
Selecting the spin speed
The maximum speeds are :
for Cottons : 1200 rpm,
for
Synthetics,
Easy
Handwash : 900 rpm,
for Delicates, Silk, Mini programme : 700
rpm.
At the end of the programme, if you have
selected "Rinse hold"
silence plus"
, you then need to select
a "Spin", "Delicate Spin" or "Drain"
programme to finish the cycle.
"Night silence plus"
The washing machine does not empty
the water after the final rinse which pre-
vents the washing from creasing. Be-
cause there are no spin cycles, the
washing programme is very quiet and
*depending on model
can be selected at night. In Cotton and
Synthetics programmes, the rinsing cy-
cle uses more water.
"Rinse hold"
The washing machine will not drain the
water from the last rinse, so will not
crease the laundry.
symbol
Selecting options
Turn
the
spin
speed
selector
on the desired
speed. You can
also select "No
spin"*,
"Rinse
*
hold"
or
Press the desired button(s) ; the corres-
"Night
silence
ponding lights come on. If pressed
plus"
*.
again, the lights go out. If one of the op-
tions is not compatible with the selected
programme, the "Start/Pause" pushbut-
iron,
Wool,
ton flashes red.
"Eco" option
This option allows you to choose a lower
temperature programme which is as
effective as a higher temperature wash
or "Night
programme.
"Super Quick" option
The washing time will be reduced
depending on the programme selected.
"Prewash" option
The appliance runs a prewash at 30°C
max. The prewash finishes with a short
spin cycle for cotton or synthetic
programmes, and with an empty cycle
for delicates programmes.
How to run a wash cycle 9
You must select the
different options af-
ter
selecting
the
programme
and
before pressing the
"Start/Pause" pus-
hbutton (see "Pro-
gramme table").