Zanussi DW 920 Livret d'instructions - Page 5

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Zanussi DW 920. Zanussi DW 920 32 pages. Dishwasher
Également pour Zanussi DW 920 : Livret d'instructions (32 pages), Livret d'instructions (32 pages)

Imprimer la page

INSTALLATION

Remove all packaging before positioning the

Installing and Securing the Machine Under

machine.

a Kitchen Unit (Sink-Worktop Unit)

Positioning

If possible, position the machine next to a water tap

and a drain.

The sides and the back of the dishwasher can rest

against the adjacent furniture or the wall.

The dishwasher features fill and drain hoses which

can be turned either to the left or the right to suit the

installation.

Leveiiing

Good levelling is essential for correct closure and

seal of the door.

Loosen or tighten the adjustable support feet, until

the machine is perfectly level.

Adjusting the Worktop

By removing the machine's worktop, you can install it

under a close fitting sink unit or a pre-existing top, if

the dimensions of the recess correspond to those

shown in the picture.

Then proceed as follows:

— Remove the machine worktop by unscrewing the

two front retaining screws, pull from the front and

slide out of the rear slots, lifting the worktop.

— Insert the machine after adjusting the height and

levelling with the adjustable feet. When inserting

the machine, ensure that the water inlet and drain

hoses are not bent or squashed.

Caution

Once the machine has been installed, ensure that it

can be accessed easily for servicing.

You can move the worktop forward or backward by

25 mm in order to align the machine with the other

kitchen units.

Simply unscrew the two front retaining screws, move

the top to the required position and then retighten the

screws.