Zanussi DWS685 Livret d'instructions - Page 6

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Zanussi DWS685. Zanussi DWS685 24 pages. Dishwasher dws 685

Filling with salt

Only use salt specifically designed for use

in dishwashers.

All other types of salt not specifically

designed for use in a dishwasher, especially

table salt, will damage the water softener.

Only fill with salt just before starting one of

the complete washing programmes. This will

prevent any grains of salt or salty water,

which may have been spilled, remaining on

the bottom of the machine for any period of

time, which may cause corrosion.

To fill:

1. To fill with salt, unscrew the cap of the salt

container.

2. Pour 1 litre of water inside the container (this is

necessary only before filling with salt for the

first time).

3. Using the funnel provided, pour in the salt until the

container is full.

Do not worry if water over flows from the unit when

filling with salt, this is quite normal.

4. Replace the cap making sure that there is no trace

of salt on the screw thread or on the gasket.

5. Screw on the cap tightly.

The salt container will require topping up periodically.

You are reminded of this by the salt indicator light on

the control panel which comes on when the salt has

finished.

The salt indicator light on the control panel

can remain illuminated for 2-6 hours after

the salt has been replenished, assuming the

dishwasher remains switched on. If you are

using salts that take longer to dissolve then

this can take longer. The function of the

machine is not affected.

SR06

SAL01en