Zanussi ZDT311 Manuel de l'utilisateur - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZDT311. Zanussi ZDT311 32 pages. Zanussi dishwasher user manual
Également pour Zanussi ZDT311 : Manuel de l'utilisateur (20 pages)

Imprimer la page

This appliance is equipped with the "Multi-Tab

function", that allows the use of the "Multi-Tab

" combi detergent tablets.

These products are detergents with a combined

cleaning, rinsing and salt functions. They can

also contain other different agents depending

on which kind of tablets you choose ("3 in 1",

"4 in 1", "5 in 1" etc...)

Check whether these detergents are suitable

for your water hardness. See the manufactur-

ers instructions.

Once this function is selected it will remain ac-

tive also for the following washing programmes.

With the selection of this function the inflow of

rinse aid and salt from each respective supply

container is automatically deactivated and also

the indicator lights for salt and rinse aid are de-

activated.

Select the "Multi-Tab function" before the start

of a washing programme.

With the use of the "Multi-Tab function", the cy-

cle durations may change.

Once the programme is running, the "Multi-Tab

function" can NO longer be changed.

If you want to exclude the "Multi-Tab function"

you have to cancel the programme setting and

then deactivate the "Multi-Tab function". In this

case you have to set a washing programme

(and desired options) again.

Activation/deactivation of the Multi-Tab

function

Press simultaneously the two buttons posi-

tioned over the Multi-Tab symbol, until the

"Multi-Tab function "indicator light illuminates.

This means that the function is active.

To deactivate the function press the same but-

tons again until the indicator light correspond-

ing to the "Multi-Tab function" symbol turns off.

IMPORTANT!

If the drying results are not satisfactory we sug-

gest that you:

1. Fill up the rinse aid dispenser with rinse aid.

2. Activate the rinse aid dispenser.

3. Set the rinse aid dosage to position 2.

• The activation/deactivation of the rinse aid

dispenser can only be possible with the

"Multi-Tab function" active.

Activation/deactivation of the

rinse aid dispenser

1. Press the On/Off button. The dishwasher

must be in setting mode.

2. Press simultaneously buttons B and C, un-

til the indicator lights of buttons A, B, and

C start flashing.

3. Press button B, the indicator lights of but-

tons A and C turn off while the indicator

light of button B goes on flashing.

4. To activate the rinse aid dispenser, press

button B again, the end of programme in-

dicator light illuminates, indicating that the

rinse aid dispenser has been activated.

5. To memorise the operation, switch off the

dishwasher by pressing the On/Off button.

6. To deactivate the rinse aid dispenser

again, follow the above instructions until

the end of programme indicator light turns

off.