Zanussi ZDT36001FA Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZDT36001FA. Zanussi ZDT36001FA 21 pages.
Imprimer la page
OPTIONS
Desired options must be activated
every time before you start a
programme.
It is not possible to activate or
deactivate options while a programme
is running.
Not all options are compatible with
each other. If you select non
compatible options, the appliance
automatically deactivates one or more
of them. Only the indicators of the still
active options are on.
If an option is not applicable to a
programme, the related indicator is off
or it flashes quickly for a few seconds
and then goes out.
Activating options can affect the water
and energy consumption as well as
the programme duration.
OPTION XTRADRY
Activate this option to boost the drying
performance. With XtraDry on, the duration of some
programmes, water consumption and the last rinse
temperature can be affected.
XtraDry is a permanent option for all programmes
other than
and need not to be selected at
every cycle.
SETTINGS
PROGRAMME SELECTION MODE
In the programme selection mode, it is possible to
set a washing programme and to enter the user
mode to change the appliance settings.
To enter the programme selection mode:
Press on/off button.
•
The display shows the number of the
programme
•
After a few seconds the display shows the
programme duration.
If the control panel does not indicate that the
appliance is in the programme selection mode,
follow the CANCEL procedure.
CANCEL PROCEDURE
Use CANCEL to:
.
In the other programmes the setting of XtraDry is
permanent and it is automatically used in next
cycles. This configuration can be changed at any
time
This option is not available with
HOW TO ACTIVATE XTRADRY
Press
.
The related indicator is on.
The display shows the updated programme
duration.
OPTION TIMESAVER
This option increases the pressure and the
temperature of the water. The washing and the
drying phases are shorter.
The total programme duration decreases by
approximately 50%.
The washing results are the same as with the
normal programme duration. The drying results can
decrease.
If the option is not applicable to the programme, the
related indicator does not turn on or it flashes
quickly for a few seconds and then turns off.
HOW TO ACTIVATE TIMESAVER
Press
.
The related indicator is on.
The display shows the updated programme
duration.
•
Cancel a currently running programme.
•
Stop the countdown of Delay option.
•
Bring the appliance back to the programme
selection mode.
To CANCEL:
Press and hold CANCEL until the control panel
indicates the appliance is in the programme
selection mode.
USER MODE
Settings available in the user mode:
•
The level of the water softener according to the
water hardness.
•
Activation or deactivation of the rinse aid empty
notification.
•
Activation or deactivation of the acoustic signal
indicating the end of a programme.
.
7