Zanussi ZDTS 102 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZDTS 102. Zanussi ZDTS 102 16 pages.

7. Press the programme selection/cancel button one

time to increase the water softener level by one step.

Use of dishwasher salt

Caution! Only use dishwashers salt. Types of salt

that are not applicable for dishwashers cause

damage to the water softener.

Fill the salt container with

1 litre of water (only the

first operation).

Caution! Only use branded rinse aid for

dishwashers.

Do these steps to fill the rinse aid dispenser:

8. Press the on/off button to save the operation.

It is normal that water overflows from the salt con-

tainer when you fill it with salt.

Make sure that there is no grain of salt outer of the

salt compartment. Salt which stays on the tank for

a while drills the tank. It is recommended to start a wash-

ing programme immediately after you fill the salt con-

tainer. This prevents of corrosion because of spilled salt.

When you set electronically the water softener to level 1,

the salt indicator light does not stay on.