Zanussi ZSF2450 Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZSF2450. Zanussi ZSF2450 20 pages. Product manaul
Également pour Zanussi ZSF2450 : Manuel de l'utilisateur (20 pages), Manuel de l'utilisateur (20 pages)

Imprimer la page

2. Set a new washing programme .

Fill the detergent dispenser with detergent be-

fore you set a new washing programme.

Interrupting a washing programme

Open the door.

• The programme stops.

Close the door.

• The programme continues from the point of

interruption.

Setting and starting a washing programme

with delay start

1. Press the on/off button.

2. Set a washing programme.

3. Press the delay start button until the display

shows on flashing the necessary delay start of

the washing programme.

– The delay start indicator light comes on.

4. Close the door.

– The number on the display comes on with

fixed light.

– The countdown of the delay start starts.

– The countdown of the delay start decrea-

ses with steps of 1 hour.

– When the countdown is completed, the

washing programme starts automatically.

Do not open the door during the count-

down to prevent interruption of the count-

down. When you close the door again, the count-

down continues from the point of interruption.

Cancelling a delay start:

1. Press and hold function buttons B and C until

all the programme lights come on.

Care and cleaning

Warning! Switch the appliance off before

you clean it.

Cleaning the filters

Important! Do not use the appliance without the

filters. Make sure that the installation of the

filters is correct. Incorrect installation will cause

unsatisfactory washing results and damage to the

appliance.

– When you cancel a delay start, you also

cancel the washing programme.

2. Set a new washing programme.

You can select the washing programme and

delay start also with the door closed. When

you press a programme button you have only 3

seconds to select a different washing programme

or a delay start. After these 3 seconds, the selec-

ted programme starts automatically.

End of the washing programme

Switch off the appliance in these conditions:

• The appliance stops automatically.

• The display shows 0.

• The end of programme indicator comes on.

1. Press the on/off button.

2. Open the door.

3. For better drying results, keep the door ajar

for some minutes before you remove the

dishes.

Let the dishes cool down before you remove

them from the appliance. Hot dishes are easily

damaged.

Standby mode

If you do not switch off the appliance at the end

of the washing programme, the appliance auto-

matically goes into standby mode. The standby

mode decreases energy consumption.

Three minutes after the end of the programme,

all indicator lights go off and the digital display

shows one horizontal bar.

Press one of the buttons (not the on/off button),

to go back to end-of-programme mode.