Zanussi ZTI 6100 Manuel d'instruction - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Zanussi ZTI 6100. Zanussi ZTI 6100 27 pages.

Imprimer la page

Operating sequence

Check the filters

Ensure they are clean and properly positioned

(see "Maintenance and cleaning").

Press the On/Off push button

The display will show the last selected

programme (if with the last programme options

have been selected the corresponding indicator

lights will illuminate).

Check that there is rinse aid

and salt

The corresponding indicator lights will illuminate

if refilling is necessary.

Load the dishes

Remove any scraps of food.

Pull the lower basket out and arrange the

saucepans, plates and cutlery in it.

Pull the upper basket out and arrange the

plates, saucers, glasses and cups etc. in it.

Slide the baskets back into the machine.

Ensure that the spray arms can

rotate freely.

Measure out detergent

Add the required amount of detergent into the

dispenser.

Close the detergent dispenser lid.

Important!

If the half load option is selected remember

to reduce the quantity of detergent.

7a. Setting and starting the

programme without "delay

start"

The selection of the programme occurs with

the door partially opened.

Press the "programme selector" push button

until the required programme number

appears in the digital display.

To see the duration of the programme (in

minutes), only with open door, press the

"cancel" push button

The following options may also be

selected:

Half load: by pressing the corresponding

push button

Eco drying/no drying by pressing the

corresponding push button.

Close the door, the programme will start

automatically and an audible signal advises

you of this. All the indicator lights will turn

off.

The display will show the running time

of the programme.

SEQ34en