Zanussi VH501R Instructions pour l'utilisation et l'entretien - Page 9
Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisation et l'entretien pour {nom_de_la_catégorie} Zanussi VH501R. Zanussi VH501R 19 pages. Zanussi hob
Également pour Zanussi VH501R : Instructions pour l'utilisation et l'entretien (19 pages), Instructions pour l'utilisation et l'entretien (19 pages)
Imprimer la page
The Controls
Some models have symbols on the control
area. Here is a handy guide to identify the
heating areas:
Back left
Front left
Back right
ND
Hothob
ae
Warning
Front right
Pref Power on
The control knobs are marked with an off
position '0'.
4,
otf
If the maximum setting is 5, the control is
infinitely variable between all the settings.
Zanussi Halogen Heat hobs cycle 'on' and
'off' when the lower settings on the control
dial are used, showing that the energy into
the hob is being regulated.
Control knobs marked with setting 0 to 6
have six positive settings giving consistent
heat outputs each time a different setting
is selected.
Safety Devices
Conventional Ceramic Hotplates and
ZANUSSI HALOGEN
HEAT.
Built into the hob is a safety device (or
thermal limiter) which prevents the
ceramic glass overheating.
The thermal limiter will operate if you use
pans which are not ideal, for example,
concave based pans with shiny reflective
bases, or grooved bases, the safety device
can cause the heated areas to switch on
and off during cooking, particularly at
maximum setting. This causes no harm to
the hob, it just means food will take a little
longer to cook, but to prevent unnecessary
switching on and off, turn down from
maximum to a lower setting.
If any of the heating areas are left on and
uncovered, the thermal limiter will ensure
that heat build-up is insufficient to cause
any adverse effects. After several minutes
at maximum setting the device switches
the element off and on continually until
the control switch is reset by the user.
The Indicator Lights
@ For Conventional ceramic hobs:
An indicator light will glow when a
heated area ts switched on, and serve as
a reminder to turn the control switch
back to off when cooking is complete.
@ For ZANUSSI HALOGEN HEAT:
When the control knob is switched on
an indicator light will glow to serve asa
reminder to turn the control switch off
when cooking is complete. During use,
if this light switches off and on it
indicates the operation of the thermal
limiter (see page 6). This causes no
harm to the hob, but it is advisable to
check the suitability of the saucepan or
reduce the setting.
Hot Hob Indicators
A single neon or a cluster of neon indicator
lights will glow when the hob ts hot. As
soon as the cooking area is cool the
indicator(s) will go out.