Zanussi ZEV6642FBV Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZEV6642FBV. Zanussi ZEV6642FBV 16 pages.

Imprimer la page
Heat
setting
3-4
Steam vegetables, fish, meat
4-5
Steam potatoes
4-5
Cook larger quantities of food, stews and
soups
6-7
Gentle fry: escalope, veal cordon bleu, cut-
lets, rissoles, sausages, liver, roux, eggs,
pancakes, doughnuts
7-8
Heavy fry, hash browns, loin steaks, steaks
9
Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep-fry chips
Information on acrylamides
Important! According to the newest scientific
knowledge, if you brown food (specially the one

Care and cleaning

Clean the appliance after each use.
Always use cookware with clean bottom.
Scratches or dark stains on the glass-ce-
ramic cause no effect on how the appli-
ance operates.
To remove the dirt:
1. – Remove immediately: melted plastic,
plastic foil, and food with sugar. If not,
the dirt can cause damage to the appli-
ance. Use a special scraper for the
glass . Put the scraper on the glass sur-

Troubleshooting

Problem
You cannot activate the appliance
or operate it.
www.zanussi.com
Use to:
Possible cause
The appliance is not connected to
an electrical supply or it is con-
nected incorrectly.
You touched 2 or more sensor
fields at the same time.
Time
20-45
Add some tablespoons of liquid
min
20-60
Use max. ¼ l water for 750 g of pota-
min
toes
60-150
Up to 3 l liquid plus ingredients
min
as nec-
Turn halfway through
essary
5-15 min
Turn halfway through
which contains starch), acrylamides can pose a
health risk. Thus, we recommend that you cook
at the lowest temperatures and do not brown
food too much.
face at an acute angle and move the
blade on the surface .
– Remove after the appliance is suffi-
ciently cool: limescale rings , water
rings, fat stains, shiny metallic discolora-
tions. Use a special cleaning agent for
glass ceramic or stainless steel.
2. Clean the appliance with a moist cloth and
some detergent.
3. At the end rub the appliance dry with a
clean cloth.
Check if the appliance is correctly
connected to the electrical supply
(refer to connection diagram).
Activate the appliance again and
set the heat setting in less than 10
seconds.
Touch only one sensor field.
Hints
Remedy
9