Zanussi ZHRN640K Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZHRN640K. Zanussi ZHRN640K 13 pages.
Également pour Zanussi ZHRN640K : Manuel de l'utilisateur (16 pages)
Imprimer la page
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem
You cannot activate or operate
the hob.
Residual heat indicator does
not come on.
IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre. Give the data from the rating plate. Give
also three digit letter code for the glass ceramic (it
is in the corner of the glass surface). Make sure,
you operated the hob correctly. If not the servicing
TECHNICAL DATA
RATING PLATE
Model ZHRN640K
Typ 60 PAD 52 AO
Ser.Nr. .................
ZANUSSI
COOKING ZONES SPECIFICATION
Cooking zone
Left front
Left rear
Right front
Possible cause
The hob is not connected to an
electrical supply or it is con-
nected incorrectly.
The fuse is blown.
The zone is not hot because it
operated only for a short time
or the sensor is damaged.
Nominal Power (Max heat setting)
[W]
2300
1200
1200
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection
diagram.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
If the zone operated sufficiently
long to be hot, speak to an Au-
thorised Service Centre.
by a service technician or dealer will not be free of
charge, also during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the guarantee
booklet.
PNC 949 492 388 00
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in Romania
6.5 kW
Cooking zone diameter [mm]
210
145
145
Remedy
9