Zanussi ZKT 630 D Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Zanussi ZKT 630 D. Zanussi ZKT 630 D 22 pages. Glass ceramic induction hob

Imprimer la page

Using the Cooking Zones

TOUCH CONTROL Sensor Field

To operate the TOUCH CONTROL sensor field, place

you finger from above and flat onto the required field

until the corresponding indicator lamp lights up or

goes out, or until the required function is carried out.

For more speedy adjustment, keep your finger on the

sensor field until the required value is reached.

All entries are acknowledged by an acoustic signal.

Switching on the Appliance

The complete unit is switched on with the "On/Off"

sensor field

Touch the "On/Off" sensor field for approximately 2

seconds.

The digital displays show j and the decimal point

flashes.

After you have actuated the "On/Off" sensor

field to switch on your unit, one of the coo-

king zones must be selected with the coo-

king

zone

approximately 10 seconds. Otherwise, the

unit switches itself off again for safety rea-

sons.

Switching Off the Appliance

To completely switch off the unit, activate the "On/

Off" sensor field

Touch the "On/Off" sensor field for approximately 1

second.

After a single cooking zone or the entire coo-

king field has been switched off, remaining

residual heat is shown in the digital displays

of the corresponding cooking zones with h

(for "hot").

selection

keys

within

If all cooking zones are switched off, the

appliance switches off automatically after a

period of time.

Cooking Zone Selection

To select the required cooking zone

touch the corresponding sensor field for approxima-

tely 1 second.

The zero with a decimal point = lights up in the

associated display field of the cooking zone. The

decimal point indicates that settings can only be

made in this cooking zone. When you touch the coo-

king zone sensor field again, the decimal point goes

out and further settings are not possible.

To switch off the sensor fields, press + and -

simultaneously.

Heat Level Selection

For setting and adjusting the heat level (! to )) on

the selected cooking zone.

Increase the heat level with the sensor field +.

Reduce the heat level with the sensor field -.

If several cooking zones are simultaneously

in operation, in order to adjust the heat level

it is necessary to select the corresponding

cooking zone by touching the appropriate

sensor field. A decimal point in the display

shows the selected cooking zone.

and