Zanussi ZV604FK Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZV604FK. Zanussi ZV604FK 16 pages.

If you cannot find a solution...

If you cannot find a solution to the problem

yourself, contact your dealer or an Authorised

Service Centre. Give the data from the rating

plate. Give also three digit letter code for the

glass ceramic (it is in the corner of the glass

surface) and an error message that comes on.

Installation

WARNING!

Refer to Safety chapters.

Before the installation

Before you install the hob, write down the

information bellow from the rating plate. The

rating plate is on the bottom of the hob.

Serial number ...........................

Built-in hobs

Only use the built-in hobs after you assemble

the hob into correct built-in units and work

surfaces that align to the standards.

Assembly

min.

500mm

min.

50mm

Make sure, you operated the hob correctly. If

not the servicing by a service technician or

dealer will not be free of charge, also during the

warranty period. The instructions about the

Service Centre and conditions of guarantee are

in the guarantee booklet.

Connection cable

• For a single phase or two phase connection,

use the cable type: H05BB-F or H03V2V2-

F which withstands a temperature of 70°C

or higher.

• To replace the damaged mains cable, use

the cable: H05BB-F or H03V2V2-F which

withstands a temperature of 70°C or higher.

R 5mm

490

min.

55mm

560