Zanussi ZBB28460SA Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZBB28460SA. Zanussi ZBB28460SA 32 pages.
Également pour Zanussi ZBB28460SA : Manuel de démarrage rapide (12 pages)

Imprimer la page

Zanussi ZBB28460SA Manuel de l'utilisateur

Remove the correct

part from the hinge

cover (E). Make sure

to remove the part

DX, in the case of

right hinge, SX in op-

posite case.

~50 mm

21 mm

~50 mm

21 mm

Install the part (Ha) on

the inner side of the

kitchen furniture.

www.zanussi.com

Attach the covers (C,

D) to the lugs and the

hinge holes.

Install the vent grille

(B).

Attach the hinge cov-

ers (E) to the hinge.

Push the part (Hc) on

the part (Ha).

G H

Connect the appli-

ance laterally to the

kitchen furniture side-

wall:

1. Loosen the

screws of the

part (G) and

move the part (G)

till the furniture

sidewall.

2. Tighten the

screws of the

part (G) again.

3. Attach the part

(H) to the part

(G).

8 mm

Open the appliance

door and the kitchen

furniture door at an

angle of 90°.

Insert the small

square (Hb) into

guide (Ha).

Put together the ap-

pliance door and the

furniture door and

mark the holes.

Disconnect the parts

(Ha), (Hb), (Hc) and

(Hd).

8 mm

Remove the brackets

and mark a distance

of 8 mm from the out-

er edge of the door

where the nail must

be fitted (K).