Zanussi ZEC 30 Livret d'instructions - Page 5

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Zanussi ZEC 30. Zanussi ZEC 30 15 pages. Zanussi instruction booklet freezer zec 30

Imprimer la page

The electrical connections

WARNING: THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should this safety

measure not be observed.

If the plug that is ﬁtted to your appliance is not

suitable for your socket outlet, it must be cut off and

the appropriate plug ﬁtted.

Remove the fuse from the cut off plug.

The cut off plug should then be disposed of to

prevent the hazard of shocks in case it should be

plugged into a 13amp socket in another part of your

home.

Important

The wires in the mains lead are coloured in

accordance with the following code:

Green and Yellow

Blue

Brown

If you ﬁt your own plug, the colours of the wires in

the mains lead of your appliance may not

correspond with the markings identifying the

terminals in your plug, proceed as follows:

GREEN & YELLOW

13 AMP. FUSE

BROWN

BLUE

CORD CLAMP

D207

Connect the Green and Yellow (earth) wire to the

terminal in the plug which is marked with the letter

«E» or the earth symbol

yellow.

Connect the blue (neutral) wire to the terminal in

the plug which is marked with the letter «N» or

coloured black.

Connect the brown (live) wire to the terminal in the

plug which is marked with the letter «L» or

coloured red.

The plug moulded onto the lead incorporates a fuse.

For replacement, use a 13amp BSI362 fuse. Only

ASTA or BSI approved fuses should be used.

The plug must not be used if the fuse cover/carrier

is lost. The cover/carrier is indicated by the coloured

insert at the base of the plug.

- Earth

- Neutral

- Live

Fig. 1

, or coloured green and

A replacement cover/carrier must be obtained from

your local Zanussi Service Force Centre whose

address is listed in the Customer Care Booklet

which accompanies your instruction manual.

This appliance complies with the E.E.C. Directive No. 87/308

of 2.6.87 relative to radio interference suppression.

This appliance complies with the following

E.E.C. Directives:

- 73/23 EEC of 19.2.73 (Low Voltage Directive) and

subsequent modiﬁcations;

- 89/336 EEC of 3.5.89 (Electromagnetic

Compatibility Directive) and subsequent

modiﬁcations.

Please ensure that when the appliance is installed it is

easily accessible for the engineer in the event of a

breakdown.