Zanussi ZFA 96 W Livret d'instructions - Page 16

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Zanussi ZFA 96 W. Zanussi ZFA 96 W 20 pages. Zanussi instruction freezer zfa 96 w

Imprimer la page

Door reversal directions

1. Disconnect from the electricity supply.

2. Gently lay the fridge on its back with the top held

away from the floor by 5-8 cm (2-3 inches) of

packing;

3. Remove the ventilation grill (D).

4. remove the bottom hinge (E) by unscrewing its

three fixing screws;

5. Slide out the fridge door from pin (G), unscrew

the latter and then refit it on the opposite side;

6. remove the two plugs of the door (where

available), discovering the holes for the hinge

pins, assemble them on the opposite side;

7. using a 10 mm spanner, unscrew the hinge pin

(E) and reassemble it on the opposite side of the

hinge;

8. reassemble the lower hinge (E) on the opposite

side, using the screws previously removed. Slide

the hole cover (F) out of the ventilation grille (D)

by pushing it in the direction of the arrow and

reassemble it on the opposite side;

9. reassemble the door;

10.refit the ventilation grille (D), clipping it into place;

11. Unscrew the handle. Refit it on the opposite side

after having pierced the plugs with a punch.

Cover the holes left open with the plugs supplied

in the documentation pack.

Important

After completion of the door reversing operation,

check that the door gasket adheres to the cabinet. If

the ambient temperature is cold (i.e. in Winter), the

gasket may not fit perfectly to the cabinet. In that

case, wait for the natural fitting of the gasket or

accelerate this process by heating up the part

involved with a normal hairdryer on a low setting.

PR18

D162/a