Zanussi ZFC41400WA Manuel de l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZFC41400WA. Zanussi ZFC41400WA 16 pages.
Également pour Zanussi ZFC41400WA : Manuel de l'utilisateur (40 pages)
Imprimer la page
the outer environment humidity and if the frozen
food is not wrapped properly.
The best time to defrost the freezer when it
contains no or only a little food.
1. Switch off the appliance.
2. Remove any stored food, wrap it in several
layers of newspaper and put it in a cool
place.
3. When defrosting is completed, dry the
interior thoroughly and refit the plug.
4. Switch on the appliance.
5. Set the temperature regulator to obtain the
maximum coldness and run the appliance
for two or three hours using this setting.
6. Reload the previously removed food into the
compartment.
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem
The appliance does not operate.
The appliance is noisy.
Audible or visual alarm is on.
Power indicator light is flashing.
The lid doesn't close completely.
The lid is difficult to open.
8
Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
1. Switch off the appliance and disconnect the
2. Remove all food
3. Defrost and clean the appliance and all
4. Leave the lid open to prevent unpleasant
Possible cause
The appliance is switched off.
The mains plug is not connected
to the mains socket correctly.
There is no voltage in the mains
socket.
The appliance is not supported
properly.
The cabinet has been recently
switched on or the temperature
in the appliance is too high.
An error has occurred in measur-
ing the temperature or the appli-
ance is not working properly.
Food packages are blocking the
lid.
There is excessive frost.
The lid gaskets are dirty or sticky. Clean the lid gaskets.
appliance from electricity supply.
accessories.
smells.
If the cabinet will be kept on, ask
somebody to check it once in a
while to prevent the food inside from
spoiling in case of a power failure.
Switch on the appliance.
Connect the mains plug to the
mains socket correctly.
Connect to a different electrical
mains socket. Contact a qualified
electrician.
Check if the appliance stands
stable.
Refer to "High Temperature
Alarm" and if the problem still oc-
curs contact the nearest Author-
ized Service Centre.
Contact the nearest Authorized
Service Centre.
Arrange the packages in the right
way, see the sticker in the appli-
ance.
Eliminate excess frost.
Solution
www.zanussi.com