Zanussi ZFG06400WA Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZFG06400WA. Zanussi ZFG06400WA 12 pages.
Également pour Zanussi ZFG06400WA : Manuel de l'utilisateur (12 pages)
Imprimer la page
Installation instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way
Installation requirements
To ensure correct operation this appliance must
not be located where the temperatures will fall
below 16 °C or rise above 32 °C Avoid the fol-
lowing locations: unheated kitchen, outhouse,
conservatory, garage For correct operation this
appliance must be installed:
• In a dry atmosphere
• Out of direct sunlight
• Away from extreme temperature (not next to a
cooker or other sources of heat)
Your appliance will be heavy when loaded with
food and must therefore be stood on a strong
firm floor.
Ventilation requirements
Gently push into place until the top panel rear
ventilation grille touches against the wall When
in position a 50 mm (2" ) clear space above the
appliance should be maintained If space above
the appliance is not available, clearance of
25mm should be maintained on both sides
Ensure that the appliance does not stand on the
electrical supply cable
Parts which heat up should not be exposed
Whenever possible, the back of the appliance
should be close to a wall but leaving the required
distance for ventilation
Leveling: The appliance should be level
Rocking: Ensure the appliance is upright and
both adjusters are in firm contact with the floor
so that the cabinet is level Adjust the level by
screwing out the appropriate level adjuster at the
front, (use your fingers or a suitable spanner).
This appliance is heavy Care should be taken
when moving it
www.zanussi.com
ZANUSSI_ZFG06400WA_Hungary.indd 9
Electrical connection
• Before plugging in, ensure that the voltage
and frequency shown on the rating plate
correspond to your domestic power supply
• The appliance must be earthed The power
supply cable plug is provided with a contact
for this purpose If the domestic power supply
socket is not earthed, connect the appliance
to a separate earth in compliance with current
regulations, consulting a qualified electrician.
• The manufacturer declines all responsibility if
the above safety precautions are not observed
• This appliance complies with the E E C
Directives
9
4/1/2015 3:30:01 PM