Zanussi ZFT10210WV Manuel de l'utilisateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZFT10210WV. Zanussi ZFT10210WV 17 pages.
Imprimer la page
Problem
Door does not open easily.
If the advice does not lead to the
desired result, call the nearest
Authorized Service Centre.
CLOSING THE DOOR
1. Clean the door gaskets.
INSTALLATION
WARNING! Refer to Safety chapters.
POSITIONING
Install the appliance in a dry, well ventilated indoors
where the ambient temperature corresponds to the
climate class indicated on the rating plate of the
appliance.
Climate
Ambient temperature
class
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Some functional problems might occur
for some types of models when
operating outside of that range. The
correct operation can only be
guaranteed within the specified
temperature range. If you have any
doubts regarding where to install the
appliance, please turn to the vendor,
to our customer service or to the
nearest Authorised Service Centre.
LEVELLING
When placing the appliance ensure that it stands
level. This can be achieved by two adjustable feet
at the bottom in front.
10
Possible cause
You attempted to re-open the
door immediately after closing.
2. If necessary, adjust the door. Refer to
"Installation".
3. If necessary, replace the defective door
gaskets. Contact the Authorised Service
Centre.
REAR SPACERS
In the bag with the documentation, there are two
spacers which must be fitted as shown in the
figure.
1. Fit the spacers into the holes. Make sure that
the arrow (A) is positioned as shown in the
picture.
2. Turn counter-clockwise the spacers through
45° until they lock into place.
Solution
Wait a few seconds between
closing and re-opening of the
door.
2
1
45°
A
45°
2