Zanussi ZUNN18FS1 Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZUNN18FS1. Zanussi ZUNN18FS1 21 pages.
Imprimer la page
SWITCHING OFF
1. Press the appliance ON/OFF for 3 seconds.
The display switches off.
2. Disconnect the mains plug from the power
socket.
TEMPERATURE REGULATION
Set the temperature of the appliance by pressing
the temperature regulators.
Default recommended set temperature is:
•
-18°C for the freezer
The temperature range may vary between -15°C
and -24°C for freezer.
The temperature indicators show the set
temperature.
The set temperature will be reached
within 24 hours.
After a power failure the set
temperature remains stored.
FASTFREEZE FUNCTION
The FastFreeze is used to perform pre-freezing and
fast freezing in sequence of Freezer compartment.
This function accelerates the freezing of fresh food
and, at the same time, protects foodstuffs already
stored from undesirable warming.
To freeze fresh food activate the
FastFreeze function at least 24 hours
before placing the food to complete
pre-freezing.
1. To activate this function press the Mode button
until the corresponding icon appears.
The FastFreeze indicator flashes.
2. Press the OK button to confirm.
The FastFreeze indicator is shown.
This function stops automatically after 52 hours.
You can deactivate the FastFreeze function before
its automatic end by repeating the procedure until
the FastFreeze indicator turns off or by selecting a
different set temperature.
CHILDLOCK FUNCTION
Activate the ChildLock function to lock the buttons
from unintentional operation.
1. Press Mode until the corresponding icon
appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function, repeat the
procedure until the ChildLock indicator goes off.
DRINKSCHILL FUNCTION
The DrinksChill function is to be used to set an
acoustic alarm at the preferred time, useful for
example when a recipe requires to cool down food
products for a certain period of time.
It is also useful when a reminder is needed in order
not to forget the bottles or cans placed in the
freezer for fast cooling.
1. Press Mode until the corresponding icon
appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30 minutes) for a
few seconds.
2. Press the Timer regulator to change the Timer
set value from 1 to 90 minutes.
3. Press OK to confirm.
The DrinksChill indicator is shown.
The Timer starts to flash (min).
At the end of the countdown the "0 min" indicator
flashes and an audible alarm sounds. Press OK to
switch off the sound and terminate the function.
To switch off the function repeat the procedure until
the DrinksChill goes off.
It is possible to change the time at any
time during the countdown and at the
end by pressing the Temperature
colder button and the Temperature
warmer button.
HIGH TEMPERATURE ALARM
When there is a temperature increase in the freezer
compartment (for example due to an earlier power
failure), the alarm and freezer temperature
indicators flash and the sound is on.
To deactivate the alarm:
1. Press any button.
The sound switches off.
2. The freezer temperature indicator shows the
highest temperature reached for a few
seconds, then the display shows the set
temperature again.
The alarm indicator continues to flash
until the normal conditions are
restored.
If you do not press any button, the
sound switches off automatically after
around one hour to avoid disturbing.
DOOR OPEN ALARM
If the freezer door is left open for approximately 90
seconds, the sound is on and alarm indicator
flashes.
9