Zanussi ZUT 143W1 Manuel d'instruction - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Zanussi ZUT 143W1. Zanussi ZUT 143W1 20 pages. Zanussi freezer instruction bood

Imprimer la page

Using the Appliance

Before Use

Remove all packaging and securing tapes. Wash

inside the appliance with lukewarm water and

bicarbonate of soda (5 ml to 0,5 litre of water). Do not

use soap or detergent as the smell may linger. Dry

thoroughly.

Do not use detergents, abrasive powders,

highly perfumed cleaning products, wax

polishes or products containing alcohol.

To Start the Appliance

1. Allow the appliance to stand for 2 hrs after

installation.

2. Plug in the appliance and switch on at the mains

supply.

3. Push the 'fast freeze' switch (c) (yellow indicator

light will illuminate) and leave to run for 4 hours to

allow the correct temperature to be reached before

placing food inside.

4. The red indicator light will also illuminate until the

correct temperature is reached.

5. When the appliance has reached the set

temperature and the red indicator light has gone

out push the 'fast freeze' switch (c) again and the

switch turns to its original position.

Thermostat Control

The temperature within the freezer is controlled by the

thermostat control knob situated on the control panel.

0 = Off

Turning the thermostat control knob clockwise makes

the temperature progressively colder.

Freezing Fresh Food

It is important that fresh food placed in the freezer is

frozen quickly and that the food already in the freezer

is heated as little as possible.

If more than 3-4 kg of food is to be frozen:

1. Push the fast freeze switch (c) 6-24 hours before

placing the fresh food in the freezer, the yellow light

will illuminate. The compressor will now run

continuously, to ensure that the fresh food is frozen

as quickly as possible.

2. Place the food in the freezing compartment and

leave the 'fast freeze' switch on for a further 24

hours.