Zanussi ZV 200 R3 Livret d'instructions - Page 6

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Zanussi ZV 200 R3. Zanussi ZV 200 R3 8 pages.
Également pour Zanussi ZV 200 R3 : Livret d'instructions (8 pages)

Imprimer la page

INSTALLATION

Location

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct

sunlight etc.

For safety reasons, minimum ventilation must be as

shown in Fig.

Appliance positioned under overhanging kitchen wall

units (see Fig. A).

Appliance positioned without overhanging kitchen

wall units (see Fig. B).

Attention: keep ventilation openings clear of

obstruction.

Two adjustable feet at the cabinet base allow

accurate levelling of the appliance.

Rear spacers

In the bag with the documentation, there are two

spacers which must be fitted in the two top

corners.

Slacken the screws and insert the spacer under the

screw head, then re-tighten the screws.

Electrical connection

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply. Voltage

can vary by ±6% of the rated voltage.

For operation with different voltages, a suitably sized

auto-transformer must be used.

The appliance must be earthed.

The power supply cable plug is provided with a

contact for this purpose.

If the domestic power supply socket is not earthed,

connect the appliance to a separate earth in

compliance with current regulations, consulting a

specialist technician.

The Manufacturer declines all responsibility if

the above safety precautions are not observed.

This appliance complies with the following

E.E.C. Directives:

- 87/308 EEC of 2/6/87 relative to radio interference

suppression.

- 73/23 EEC of 19.2.73 (Low Voltage Directive) and

subsequent modifications;

- 89/336 EEC of 3.5.89 (Electromagnetic

Compatibility Directive) and subsequent

modifications.

All manuals and user guides at all-guides.com

NP007

D594

ATTENTION!

It must be possible to disconnect the appliance from

the mains power supply; the plug must therefore be

easily accessible after installation.

HINTS

Hints for freezing

To help you make the most of the freezing process,

here are some important hints:

• the maximum quantity of food which can be

frozen in 24 hrs. is shown on the rating plate;

• the freezing process takes 24 hours. No further

food to be frozen should be added during this

period;

• prepare food in small portions to enable it to be

rapidly and completely frozen and to make it

possible subsequently to thaw only the quantity

required;

• wrap up the food in aluminium foil or polythene

and make sure that the packages are airtight;

• do not allow fresh, unfrozen food to touch food

which is already frozen, thus avoiding a rise in

temperature of the latter;

• water ices, if consumed immediately after

removal from the freezer compartment, can

possibly cause the skin to be freeze burnt;

• it is advisable to show the freezing-in date on

each individual pack to enable you to keep tab of

the storage time;

• The symbols on the drawers show different types

of frozen goods.

The numbers indicate storage times in months for

the appropriate types of frozen goods. Whether

the upper or lower value of the indicated storage

time is valid depends on the quality of the foods

and pre-treating before freezing.

• do not put carbonated liquids (fizzy drinks,

etc.) in the freezer compartment as they may

burst.

Hints for storage of frozen food

To obtain the best performance from this appliance,

you should:

• make sure that the commercially frozen

foodstuffs were adequately stored by the retailer;

• be sure that frozen foodstuffs are transferred

from the foodstore to the freezer in the shortest

possible time;

• not open the door frequently or leave it open

longer than absolutely necessary.

• Once defrosted, food deteriorates rapidly and

cannot be refrozen.

• Do not exceed the storage period indicated by

the food manufacturer.