Zanussi ZV 48 RF Livret d'instructions - Page 5

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Zanussi ZV 48 RF. Zanussi ZV 48 RF 16 pages. Zanussi owners manual freezer zv 48 rf

Imprimer la page

OPERATION

Before use

Remove all securing tapes. Wash inside the appliance

with lukewarm water and bicarbonate of soda

(5 ml to 0.5 litre of water). Do not use soap or deter-

gent as the smell may linger. Dry thoroughly.

Freezer controls

1 - Thermostat control knob

2 - Fast freeze switch

3 - Fast freeze light (yellow)

4 - Mains on light (green)

Starting your appliance

Insert the plug into the wall socket. The pilot light (4)

will light up to show that the appliance is on.

Temperature control

The temperature within the freezer is controlled by

the thermostat situated at the bottom of the cabinet

(1).

To operate the freezer proceed as follows:

Turn the thermostat control beyond the «O» position.

When you first start the freezer, we suggest that you

turn the thermostat control to a medium setting. For

easier turning of this control, use a small coin.

The internal temperature of the freezer is automati-

cally adjusted by the thermostat to ensure safe food

storage. However, if the appliance is working in

unfavourable room conditions such as high tempera-

ture and frequent door openings, it may be neces-

sary to select a more suitable setting.

To obtain a colder temperature, turn the thermostat

control to the higher numbers; to obtain a warmer

temperature turn the control to the lower numbers.

Thermometer

This indicates the internal temperature of the freezer.

It may indicate a temperature above -18°C when

large quantities of food are placed inside for freezing

or when the door is left open for a long time.

Blue = -18°C - -30°C

Beige = above -18°C (-17°C or -10°C for example)

Red = alarm (temperature above -9°C)

PR202