Clarke 7629005 Instructions d'utilisation et d'entretien - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke 7629005. Clarke 7629005 4 pages. Coil spring compressor

Imprimer la page
Clarke 7629005 Instructions d'utilisation et d'entretien
Thank you for purchasing this CLARKE Hydraulic Spring Compressor.
This product is designed and constructed for use with all types of spring shock
absorber from 78mm to 182mm in diameter.
Please read this leaflet thoroughly and follow the instructions carefully, in doing so
you will ensure the safety of yourself and that of others around you, and you can
look forward to the unit giving you long and satisfactory service.
Please note that this manual is an integral part of the Spring Compressor and must
always accompany it, even in the event of sale.
CLARKE International shall not be held liable to any damage to persons or
equipment due to improper or non-permitted use of the unit.
SPECIFICATIONS
Capacity (Max. compressive tensiom) ................. 1650lbs
Max. Extension ......................................................... 260mm
Fully Retracted Dimension ...................................... 100mm
Rod Travel ................................................................. 100mm
Weight ....................................................................... 23kg
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period
of 12 months from the date of purchase. Please keep your receipt as
proof of purchase. This guarantee is invalid if the product is found to have
been abused or tampered with in any way, or not used for the purpose
for which it was intended.
Faulty goods should be returned to their place of purchase, no product
can be returned to us without prior permission.
This guarantee does not effect your statutory rights.
SAFETY PRECAUTIONS
• Never tamper with the pump. The safety valve is calibrated and sealed at the
factory, do not attempt to change these settings.
• Use ONLY the recommended hydraulic oil.
• Never use the pump for any purpose other than that for which it is designed.
• Do not exceed the maximum working pressure. See Specifications
• Use only Spare Parts supplied by Clarke International. The use of parts other
than those supplied by Clarke International could be hazardous, or cause
damage to the equipment, and will invalidate the guarantee.
2
Parts List- PUMP
Item
Description
11
Rubber Handle
12
Handle
13
Actuator
14
Circlip
15
Pin
16
Pin
22
Oil Filter
23
Steel Ball
24
Coupler
25
Dust Cover
26
High Pressure Hose
27
Nut
28
O-Ring
29
Relief Valve Knob
31
O-Ring
32
Draw Rod
33
Oil Filter
34
O-Ring
35
Oil Reservoir
36
O-Ring
37
Valve Block
38
Oil Filler Screw
39
O-Ring
40
End Cover
41
Steel Ball
42
Steel Ball retainer
43
Adjuster Spring
44
Pressure Adjuster Screw
45
Stop Nut
46
Cover
47
Spring
48
O-Ring
52
Nut
53
O-Ring
54
O-ring
55
Plunger Seal
56
Plunger Housing
57
Plunger
59
O-Ring
Qty
Part No.
1
SNCSC100011
1
SNCSC100012
1
SNCSC100013
2
SNCSC100014
1
SNCSC100015
1
SNCSC100016
1
SNCSC100022
3
SNCSC100023
1
SNCSC100024
1
SNCSC100025
1
SNCSC100026
1
SNCSC100027
1
SNCSC100028
1
SNCSC100029
1
SNCSC100031
1
SNCSC100032
1
SNCSC100033
1
SNCSC100034
1
SNCSC100035
1
SNCSC100036
1
SNCSC100037
1
SNCSC100038
1
SNCSC100039
1
SNCSC100040
1
SNCSC100041
1
SNCSC100042
1
SNCSC100043
1
SNCSC100044
1
SNCSC100045
1
SNCSC100046
1
SNCSC100047
1
SNCSC100048
1
SNCSC100052
1
SNCSC100053
1
SNCSC100054
1
SNCSC100055
1
SNCSC100056
1
SNCSC100057
1
SNCSC100059
7