Zanussi ZHC 920 Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Zanussi ZHC 920. Zanussi ZHC 920 14 pages.

150 mm (fig. 18), replace the plug.

· Air outlet directed to the right or

left hand side (fig. 4a-b).

- Remove the four screws fastening

the plastic frame, as shown in

fig. 16.

- Fit the ducting spigot R (fig. 19)

and replace the four screws removed

as above.

3 - Fixing the chimney

a) Loosen the screws M fixing the

two parts of the chimney and pull

the inner section I (fig. 20) almost

all the way out. Remove the

protective film P.

b) Rest the lower section of the

chimney in its housing on the top of

the hood canopy. Lower the ducting

fan unit until it reaches the wall

bracket S and fix it using the screw

H provided (fig. 21). Fit the cover D

(provided) on the wall bracket S (fig. 22).

c) Fix the chimney A to the hood canopy C using the four screws

provided (fig. 23).

d) Insert the transparent seal Q (provided), so as to eliminate any

play between the two parts of the chimney (fig. 24). Lock the

screws M.

e) Remove the support rod B.

A08_23

- Remove the plug

from the upper part

of the ducting fan

unit (fig. 17), as it is

not possible to insert

the flange F with the

plug in place.

- Fit the

flange F

Ø120 or

A08_20

A08_21

A08_24

A08_22