Zanussi ZHC 925 Livret d'instructions - Page 7

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Zanussi ZHC 925. Zanussi ZHC 925 21 pages. Cooker hood
Également pour Zanussi ZHC 925 : Livret d'instructions (20 pages)

Imprimer la page

Charcoal Filters

In the recirculation mode the charcoal filters

absorb smells and unwanted odours.

The charcoal filters cannot be cleaned or

regenerated, and must be replaced when the

Instensive speed LED T5 starts to flash, or at

least once every 3 months.

Attention: If, when used in the recirculation

mode both the T2 and T4 LED indicator lights

begin to flash simultaneously this indicates the

both the charcoal filter needs replacing and the

grease filters need cleaning.

Replacing the charcoal filter

First remove the metal grease filter GF

as illustrated in Fig. 1.

Carefully remove the screw from the

centre of the charcoal filter, while

holding the filter securely.

Clean the grille before replacing the

charcoal filter.

To replace the charcoal filter, place the

filter over the inlet grille and while

holding the filter with one hand insert

the screw and tighten by hand as

illustrated in Fig. 3.

This appliance can be a possible fire

hazard if the grease and charcoal filters

are not cleaned and replaced as

recommended.

Changing the Light Bulb

Unsrew the two screws from the frame

around the lamp lens as illustrated in

Fig. 4.

Remove the lamp by carefully pulling it

downwards until it clears the holder.

When replacing the lamp, ensure the

two pins are correctly positioned before

inserting the lamp into the holder by

applying carefull pressure to the lamp

lens.

If one of the halogen lamps has failed to

function check that the lamps is correctly

seated into the holder. If the lamp has failed

then it should be replaced with a 20W

spotlamp.

Replacement filters and light bulbs can be

obtained from your local Service Force

Centre.

Fig. 3

Fig. 4