Zanussi 7332543286072 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi 7332543286072. Zanussi 7332543286072 24 pages.
Également pour Zanussi 7332543286072 : Manuel de l'utilisateur (24 pages), Manuel de l'utilisateur (20 pages), Manuel de l'utilisateur (20 pages), Manuel de l'utilisateur (24 pages)

Zanussi 7332543286072 Manuel de l'utilisateur
Heat setting
Symbols
Off position
1 - 6
Heat settings
Use the residual heat to decrease
energy consumption. Deactivate the
cooking zone approximately 5 - 10
minutes before the cooking process
is completed.

Hob - Hints and tips

WARNING!
Refer to Safety chapters.
Cookware
The bottom of the cookware must be
as thick and flat as possible.
Cookware made of enamelled steel
and with aluminium or copper
bottoms can cause the colour
change on the glass-ceramic
surface.
Examples of cooking applications
Heat
set-
ting:
1
Keeping warm

Hob - Care and cleaning

WARNING!
Refer to Safety chapters.
General information
• Clean the hob after each use.
• Always use cookware with clean bottom.
• Scratches or dark stains on the surface have
no effect on how the hob operates.
• Use a special cleaner applicable for the
surface of the hob.
• Use a special scraper for the glass.
8
Function
Application:
Turn the knob to a necessary heat setting.
The hob control indicator comes on.
To complete the cooking process, turn the knob
to the off position.
If all cooking zones are deactivated, the hob
control indicator goes out.
Residual heat indicator
WARNING!
There is a risk of burns from residual
heat.
The indicator comes on when a cooking zone is
hot.
Heat
set-
ting:
2
Gentle simmering
3
Simmering
4
Frying / browning
5
Bringing to the boil
6
Bringing to the boil / quick frying /
deep-frying
Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar. If not,
the dirt can cause damage to the hob. Take
care to avoid burns. Put the special scraper
on the glass surface at an acute angle and
move the blade on the surface.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat stains,
shiny metallic discoloration. Clean the hob
with a moist cloth and non-abrasive
Application:
www.zanussi.com