Zanussi 943006147 Manuel de l'utilisateur - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi 943006147. Zanussi 943006147 28 pages.

Imprimer la page

Zanussi 943006147 Manuel de l'utilisateur

Problem

The flame extinguishes immedi-

ately after ignition.

The flame ring is uneven.

The burners do not work.

The appliance makes noises.

The flame colour is orange or yel-

low.

The lamp does not operate.

Steam and condensation settle

on the food and in the cavity of

the oven.

The oven does not heat up.

The turnspit does not rotate.

It takes too long to cook the

dishes or they cook too quickly.

Service data

If you cannot find a solution to the problem

yourself, contact your dealer or an Authorised

Service Centre.

Model (MOD.)

Product number (PNC)

Serial number (S.N.)

Possible cause

Thermocouple is not heated up

sufficiently.

Burner crown is blocked with

food residues.

There is no gas supply.

The lamp is defective.

You left the dish in the oven for

too long.

The necessary settings are not

set.

The turnspit is not correctly in-

stalled into the turnspit hole.

The temperature is too low or too

high.

We recommend that you write the data here:

After lightning the flame, keep the

spark generator activated for

equal or less than 10 seconds

Make sure that the injector is not

blocked and the burner crown is

clean.

Check the gas connection.

Some metal parts of the appli-

ance expand and contract when

they heat up or cool down. The

noises are normal.

The flame can look orange or yel-

low in some areas of the burner.

This is normal.

Replace the lamp.

Do not leave the dishes in the

oven for longer than 15 - 20 mi-

nutes after the cooking process

ends.

Make sure that the settings are

correct.

Refer to "Using the turnspit".

Adjust the temperature if neces-

sary. Follow the advice in the

user manual.

The necessary data for the service centre is on

the rating plate. The rating plate is on the front

frame of the appliance cavity. Do not remove

the rating plate from the appliance cavity.

.........................................

Remedy