Zanussi ZCG563 Manuel de l'utilisateur - Page 19
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZCG563. Zanussi ZCG563 28 pages. Product manaul
Également pour Zanussi ZCG563 : Manuel (25 pages)
Imprimer la page
The burner is not igniting or only partially lighting.
The burner sounds noisy.
The burner is emitting a popping sound.
Noise
Technical Data
Dimensions
Height:
Width:
Depth:
Weight:
Space for fixing at hob level
Space for fixing above hob level
Minimum space above hob level
Connections
Gas connection
Connections
Electrical connection
Ignition
GAS CONSUMPTION TABLE
LARGE BURNER
INJECTOR % mm
NOMINAL RATING (KW)
CONSUMPTION IN 1h
Problem
87
3
218.1 gr/h
Possible solution
• Check that the burner is dry and that food spillage
or cleaning fluids are not present on the burner. This
can be dried with a cloth and stubborn marks
cleaned away with a dry nylon brush (old toothbrush
etc.)
• It is natural for the burners to emit noise as the gas
is being drawn through the burner and may reduce
as they heat up.
• This is a natural occurrence when the burner is
alight and does not affect the performance of the
burner.
• It is normal for some metal parts on the cooker to
produce noise when in use, this is due to expansion
and contraction when heating up and cooling down.
900mm (nominal)
500mm (nominal)
600mm (nominal)
47.3Kg
20mm minimum clearance
See important note location of appliance
787mm (If a cooker hood is fitted refer to the cookerhood
installation instructions)
Rear left hand side of appliance at hob level. Rc ½" ( ½
" B.S.P. female)
None
Battery 1.5 Volt AA size
LPG
GB: I3+
IE: I3+
NG
GB: I2H
129
2.75
261.9 lt/h
19