Zanussi ZCG62386 Manuel de l'utilisateur - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZCG62386. Zanussi ZCG62386 28 pages.

Problem

The display shows an error code

that is not in this table.

Service data

If you cannot find a solution to the problem

yourself, contact your dealer or an Authorised

Service Centre.

Model (MOD.)

Product number (PNC)

Serial number (S.N.)

Installation

WARNING!

Refer to Safety chapters.

Location of the appliance

You can install your freestanding appliance with

cabinets on one or two sides and in the corner.

Keep a distance of about 1 cm

between the appliance and the back

wall to make sure that the lid opens.

For minimal distances for fitting check the table.

Possible cause

There is an electrical fault.

We recommend that you write the data here:

Deactivate the oven with the

house fuse or the safety switch in

the fuse box and activate it again.

If the display shows the error

code again, contact the Custom-

er Care Department.

The necessary data for the service centre is on

the rating plate. The rating plate is on the front

frame of the appliance cavity. Do not remove

the rating plate from the appliance cavity.

.........................................

Minimum distances

Dimension

Remedy

400

650

150