Command
service-type
state
Table 6 User-interface view
[4500]user-interface 1
Command
acl
authentication-mode
auto-execute command
databits
flow-control
history-command max-size
idle-timeout
parity
protocol
screen-length
set authentication password
shell
speed
stopbits
user privilege level
Table 7 VTY User-interface View
[4500]user-interface 1 integer (0-12)
[4500]user-interface 1 aux
[4500]user-interface 1 vty
Command
protocol inbound
Table 8 Public Key Edit View
[4500]rsa peer-public-key switchxxx
(where xxx is the Switch number)
Command
public-key-code begin
public-key-code end
Table 9 Public Key View
Command
peer-public-key end
Description
Configure a service type for a particular user
Configure the state of the current user
Description
Reference ACL and implement the ACL control to the TELNET
users
Configure local password authentication method
Configure to automatically run a specified command after a
user logs on
Configure the data bits for AUX (Console) port
Configure the flow control mode on AUX (Console) port
Configure the size of the history command buffer
Configure the timeout function
Configure the parity mode on AUX (Console) port
Set user interface protocol
Configure how many lines can be displayed on a screen of
the terminal
Configure the password for local authentication
Enable terminal service of a user interface
Specify the transmission rate on the AUX (Console) port in
bit/s
Configure the stop bits on the AUX (Console) port
Configure which level of command a user can use after logon
from a specific user interface
Description
Configure the protocols supported by a designated user
interface
Description
Enter public key edit view (See
View," on page
12)
Save the configured public key and return to the public key
view
Description
Finish editing peer public key and quit from public key view
to system view
12
Table 8, "Public Key Edit
Web Command
Web Command
Security -> Authorized IP
Administration -> System
Access
Web Command
Web Command
Web Command
Imprimer la page