Directed CHRYSLER4 Manuel d'installation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Directed CHRYSLER4. Directed CHRYSLER4 16 pages. Door lock/convenience and override firmware for most chrysler, dodge and jeep.
Imprimer la page
Platform: DBALL2
Firmware:
CHRYSLER4
Module Reset
A module reset will erase the module programming
configured on the module using the web
D2D Installation
If required for your installation, c
14-pin harnesses to the module Press
p
rogramming button
OR
1
W2W Installation
If required for your installation, connect the 10-pin & 12-pin
harnesses to the module Press
button, then connect the 14-pin harness to the module.
Wait 3 seconds until the
2
p
rogramming button.
Hard Reset
Warning gainst xecuting a Hard Reset!
A
E
A hard reset will erase all the data stored in the
default values. After a hard reset, you may have to reconfigure your
not part of the default configuration. See the
D2D Installation
If required for your installation, c
14-pin harnesses to the module Press
p
rogramming button
OR
1
W2W Installation
If required for your installation, connect the 10-pin & 12-pin
harnesses to the module Press
button, then connect the 14-pin harness to the module.
Wait 3 seconds until the
2
until the
LED starts to flash orange
3
Release the programming button. The
only
config
tool will remain untouched
onnect the 10-pin 12-pin
.
and
hold the
, then connect the 4-pin D2D harness.
.
and
hold the rogramming
p
LED turns
ON
solid
orange then release the
The
LED
then turns
ON
solid red.
DBALL
and will change all the settings configured on the module to its
Feature & Option List
onnect the 10-pin 12-pin
.
and
hold the
, then connect the 4-pin D2D harness.
.
and
hold the rogramming
p
LED turns
ON
solid
orange
and
red.
LED
turns
(bypass, convenience and vehicle detection). All the settings
.
,
&
th
5
st
1
st
1
DBALL
if your installation requires specific options,
section of this guide.
,
&
th
5
st
1
st
1
, and w
ait
10 more seconds
ON
solid red.
Rev.: 20170818
Page 10
rd
3
nd
2
th
4
th
4
nd
2
rd
3
&
&
Solid
Release
Solid
rd
3
nd
2
th
4
th
4
nd
2
rd
3
&
Solid
Flashes
&
Release
Solid
© 2017 Directed. All rights reserved.