Blackberry ITC100-1 Manuel d'installation - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Blackberry ITC100-1. Blackberry ITC100-1 28 pages. Dry van, insulated trailers roll-up doors
Également pour Blackberry ITC100-1 : Manuel d'installation (33 pages), Manuel d'installation (26 pages), Manuel d'installation (32 pages), Manuel d'installation (33 pages), Manuel d'installation (35 pages), Manuel d'installation (28 pages), Manuel d'installation (34 pages), Manuel d'installation (35 pages), Manuel d'installation (30 pages), Manuel d'installation (35 pages), Manuel d'instruction (33 pages), Manuel d'installation (32 pages), Manuel d'installation (26 pages), Manuel d'installation (25 pages), Manuel d'instruction (35 pages)

Blackberry ITC100-1 Manuel d'installation
BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE
Drilling tips for chassis and frame installations
Due to the thicker, harder steel used on chassis and trailer frames, you may wish
to follow these suggestions.
Tip 1: To shorten drilling time and prolong the life of your drill bit, you may wish
to use cutting tool lubricant during the drilling process.
Tip 2: For most precise hole drilling, before drilling your hole, you may wish to
use a punch and hammer to help place the drill bit. This will prevent the bit from
"walking" during the drilling operation.
4. Remove the template. If there are any burrs around the holes, remove them. Also,
remove any dust or debris left over from the drilling or de-burring operations.
5. Place the module on the chassis, aligning the holes on the module with the holes you
drilled into the asset.
FLATBED AND HEAVY EQUIPMENT
18