Directed Directechs DB3 Manuel d'installation - Page 8

Imprimer la page

Directed Directechs DB3 Manuel d'installation

Vehicle connections

The connection information listed below is specific to the 2017 Ford F-150 Work Truck. Refer to "Pre-installation and application warnings" for a list of important notes.

Data 14-pin blue connector (H1)

Module

Conn./Pin

Color

H1/1

Light Green

H1/2

Violet/Yellow

H1/3

Tan/Black

H1/4

Tan

H1/5

Orange/Green

H1/6

Orange/Brown

H1/7

Brown

H1/8

Yellow

H1/9

Orange/Yellow

H1/10

Orange/Red

H1/11

Yellow/Red

H1/12

Brown/Red

H1/13

Red

H1/14

Black

Output 12-pin red connector (H2)

Module

Conn./Pin

Color

H2/1

Black/White

H2/2

Green/Black

H2/3

Green/White

H2/4

Red/Black

H2/5

Violet/White

H2/6

Gray

H2/7

Gray/Black

H2/8

Violet/Green

H2/9

Violet/Brown

H2/10

Yellow/Black

H2/11

Orange/Black

403.FORD10 3.11 2017 Ford F-150 Work Truck

Description

No Connection

(DATA) MS CAN High

(DATA) MS CAN Low

(DATA) HS CAN High

(DATA) HS CAN Low

Relay N.O. No Connection

Relay COM Immo. Data Interrupt (conn. side)

Relay N.C. Immo. Data Interrupt (vehicle side)

Relay N.C. RAP Off Interrupt (conn. side)

Relay COM RAP Off Interrupt (vehicle side)

Relay N.O. No Connection

(+) W2W Only - 12 Volt

(-) W2W Only - Ground

Description

No Connection

(-) Ignition /Accesory Output

(-) W2W Only - Door Output

(-) W2W Only - Trunk Output

(AC) W2W Only - Tach Output [1]

(+) W2W Only - Trunk Output

No Connection

(-) Trunk Release Output

(Data) Immo. Data (vehicle side)

No Connection

Connects To

Wire Location

No Connection

Gateway Module on data link connector, black 24 pin plug, pin 23

Gateway Module on data link connector, black 24 pin plug, pin 22

Gateway Module on data link connector, black 24 pin plug, pin 20

Gateway Module on data link connector, black 24 pin plug, pin 19

No Connection

PATS Transceiver on ignition switch, black 4 pin plug, pin 3

driver kick, harness to rear or BCM in passenger kick, 52 pin plug

(E), pin 33

driver kick, harness to rear or BCM in passenger kick, 52 pin plug

(E), pin 33

No Connection

BCM in passenger kick, 22 pin plug (G), pin 22

Connects To

Wire Location

No Connection

ignition switch, black 7 pin plug, pin 6

ignition switch, black 7 pin plug, pin 1

Must use a relay.

Must use (2) 6 amp diodes.

15A fuse to 12V.

Remote Starter

No Connection

driver kick or BCM in passenger kick, 52 pin plug (E), pin 14

PATS Transceiver on ignition switch, black 4 pin plug, pin 3

No Connection

(+/-)

Wire Color

data

gray/orange (MS CAN)

data

violet/orange (MS CAN)

data

white/blue (HS CAN)

data

white (HS CAN)

data

blue/white (LIN bus)

data

blue/white (LIN bus)

- N.C.

brown

- N.C.

brown

green/red (50A)

(chassis ground)

(+/-)

Wire Color

violet/green

white/orange

brown/yellow (tailgate

release) (rear handle switch)

data

blue/white (LIN bus)