Directed XpressKit DBALL Manuel - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Directed XpressKit DBALL. Directed XpressKit DBALL 14 pages. Ford5 remote start ready (rsr) installation
Également pour Directed XpressKit DBALL : Manuel d'installation (16 pages), Manuel d'installation (16 pages), Manuel (19 pages)
Imprimer la page
Quick Reference Guide
DBALL/DBALL2-FORD5 Range Extender Ready (RXT) Installation
Vehicle Takeover
Press the remote start button on the transmitter to
1
start the vehicle.*
Press the Unlock button on the factory
2
or aftermarket remote.*
Enter the vehicle, while making sure the
factory remote is inside with you. The
3
Push-to-Start (PTS) button will start
to flash.
Important: Do NOT press the brake pedal.
4
Press the PTS button twice to turn the
ignition ON.
Press the brake pedal, put the car
5
in gear and drive off.
* Your aftermarket remote may differ from the model shown in the illustrations.
Press
remote start
button*
Press Unlock
OR
button on
either remote*
ENGINE
&
START
STOP
Enter vehicle
Flashes
with Smart Key
ENGINE
2X
PUSH
START
STOP
Do NOT press
brake pedal
Ready to
drive off
Pit Stop Mode
The Pit Stop Mode feature is practical when you need to stop and run an errand,
but wish to keep the engine running.
Stop the vehicle in a safe parking spot
1
and put the gear in Park (P).
Press the button to remote start the vehicle.*
2
The PTS button will flash once to
indicate the vehicle is now in Pit Stop
Mode.
It is now safe to leave the engine running and exit the
vehicle with the factory remote in hand.
3
Note: We recommend that you always lock the doors
of your vehicle when leaving it unattended.
* Your aftermarket remote may differ from the model shown in the illustrations.
P
&
Stop & put vehicle in Park (P)
Press
ENGINE
&
START
remote start
STOP
button*
Flashes
Exit vehicle with
Smart Key
© 2016 Directed. All rights reserved.