Directed Xpresskit DBALL2 Manuel d'installation - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Directed Xpresskit DBALL2. Directed Xpresskit DBALL2 18 pages. Ford5 remote start ready (rsr) installation
Également pour Directed Xpresskit DBALL2 : Manuel d'installation (12 pages), Manuel d'installation (19 pages), Manuel (14 pages), Manuel d'installation (13 pages), Manuel d'installation (14 pages), Manuel d'installation (19 pages), Manuel d'installation (16 pages), Manuel d'installation (20 pages), Manuel d'installation (15 pages), Manuel d'installation et de référence rapide (16 pages), Manuel d'installation (18 pages), Manuel d'installation (16 pages), Manuel d'installation (18 pages), Manuel d'installation (16 pages), Manuel (19 pages)

Imprimer la page
Directed Xpresskit DBALL2 Manuel d'installation

Quick Reference Guide

DBALL2-
HYUNDAI4
Remote Start Ready (RSR) Installation
Vehicle Takeover
Press the remote start button on the transmitter to
1
start the vehicle.
*
Press the Unlock button on the factory
2
or aftermarket remote.*
Complete the following steps within 45 seconds
or the vehicle will shut down.
Enter the vehicle, while making sure the
3
factory remote is inside with you.
Press the
PTS
button twice to turn the
4
ignition
ON
.
Press the brake pedal, put the car
5
in gear and drive off.
* Your aftermarket remote may differ from the model shown in the illustrations.
Press
remote start
button
*
Press Unlock
OR
button
on
either remote*
Enter vehicle
with Smart Key
ENGINE
2X
PUSH
START
STOP
Ready to
drive off
Pit Stop Mode
The
Pit Stop
Mode feature is practical when you need to stop and run an errand,
but wish to keep the engine running.
Stop the vehicle in a safe parking spot
1
and put the gear in Park (P).
Press the button to remote start the vehicle.*
2
The
PTS
button will
flash once to
indicate the vehicle is now in P
Mode
.
It is now safe to leave the
vehicle with the
factory remote
3
Note: We recommend that you always lock the doors
of your vehicle when leaving it unattended.
* Your aftermarket remote may differ from the model shown in the illustrations.
Parking Light Error Codes
The parking lights on your vehicle will flash a specific number of times 3 seconds
following an unscheduled shutdown
described below.
Flashes
Diagnostic
1
Runtime expired.
2
Over-rev shutdown.
3
Low/No RPM.
4
Transmitter shutdown.
5
Brake shutdown.
6
Hood shutdown/Remote start safety override switch is ON*.
7
Remote start safety override switch is ON*.
* If the vehicle hood status is supported through data, safety override switch input
will report 7 flashes.
Stop & put vehicle in Park (P)
Press
remote start
it Stop
button
*
engine running and
exit
the
in hand.
E
xit
vehicle with
Smart Key
or failure to start
. Each flashing pattern is
© 2017 Directed. All rights reserved.
P
&
ENGINE
&
START
STOP
Flashes