Blackberry Radar H2 Manuel d'installation - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Blackberry Radar H2. Blackberry Radar H2 28 pages. Dry van, insulated trailers roll-up doors
Également pour Blackberry Radar H2 : Manuel d'installation (33 pages), Manuel d'installation (26 pages), Manuel d'installation (25 pages), Manuel d'installation (32 pages), Manuel d'installation (30 pages), Manuel d'installation (33 pages), Manuel d'installation (34 pages), Manuel d'installation (35 pages), Manuel d'instruction (33 pages), Manuel d'installation (32 pages), Manuel d'installation (26 pages), Manuel d'installation (25 pages)

BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE

2. After selecting the best installation location for your device, remove the adhesive from

the rear of the template and place the template in the desired installation location. The

adhesive at the back of the template ensures that it stays on the installation surface for

accurate drilling of your holes.

IMPORTANT: When mounting under a vehicle, or a piece of equipment, you

must exercise a high degree of caution to avoid serious damage to yourself, the

module, or your equipment:

•

Do not install near exhaust sources, ignition sources, or fuel tanks.

•

Use caution when installing near pneumatic, hydraulic, and electrical

lines to avoid damage to these systems during installation.

3. Using a drill bit, drill a hole through each of the cross hairs on the template. This will

create two holes you will use to mount the module.

FLATBED AND HEAVY EQUIPMENT