Clarke 07128A Manuel de l'opérateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Clarke 07128A. Clarke 07128A 20 pages. American b-2+ dc 7" edger
Également pour Clarke 07128A : Manuel de l'utilisateur (8 pages)

Imprimer la page
Clarke 07128A Manuel de l'opérateur

Machine Set-up

This sanding machine is designed to be operated with a
remote vacuum dust collection sytem or with the included
dust bag.
Preparing Remote Vacuum Dust Collection Sytems
To prepare the machine for remote vacuum dust collection
systems that have a 2" hose end, follow this procedure:
1. Install 2" hose end directly over the exhaust tube.
2. The exhaust tube can be rotated for optimum conve-
nience.
To prepare the machine for remote vacuum dust collection
systems that have a 1 ½" hose end, follow this procedure:
1. Install the 2" x 1½ house end adaptor (Part No.
30563A) over the exhaust tube.
2. Insert 1 1/2" hose end into the adaptor.
NOTE: Start the remote vacuum collection system
before operation.
Preparing to use the included dust bag
To prepare the machine for use with the included dust bag
(Part No. 53544A), follow this procedure:
1. Press the bag opening over the exhaust tube until the
internal rib of the bag opening engages into the annular
groove on the exhaust tube. This is best done by
pressing on the back of the bag opening with the palm
of your hand.
2. The exhaust tube can be rotated for optimum conve-
nience.
3. To remove the dust bag from the exhaust tube, pry up
the end of the bag opening to partially release the
internal rib from the groove, then pull.
4. To empty the dust bag, unzip the disposal flap and
force contents out by inverting the bag.
NOTE: For best results, empty frequently. Follow all
warnings posted in this manual and on the dust bag.
Page 6
Clarke American Sanders American B-2 Operator's Manual