Aft PRO-28U Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aft PRO-28U. Aft PRO-28U 10 pages. Aft pro-28u card readers: user guide
Imprimer la page
Connecting Card Reader
1. Open computer case cover. Please refer to your computer manual if necessary.
2. Insert PRO-28U into empty 3.5" drive bay.
3. Apply screws on each side of unit to secure to chassis.
4. Connect Internal USB cables to unit then to Motherboard USB header pin
5. For external use, connect the External USB cable to back of unit.
Depending on the pin layout on your motherboard USB header, it may be necessary to
rearrange the color wires of Internal USB cable to match the USB pin assignment.
Please refer to your motherboard manual for USB header pin assignment information.
Internal USB cable consists of Red, White, Green and Black wires. Each color wire shall
be connected to a specific pin on the USB header.
Red wire = Power (VCC)
White wire = P- (Data-)
Green wire = P+ (Data+)
Black wire = Ground (GND)
Motherboard connection
Pin 1 = USB Power
Pin 2 = USBP2-
Pin 3 = USBP2+
Pin 4 = GND
Pin 5 = NC
Pin 6 = USB Power
PIn 7 = USBP3-
Pin 8 = USBP3+
Pin 9 = GND
Pin 10 = NC (No pin)
5