Clarke METALWORKER CHDB500 Manuel d'utilisation et d'entretien - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke METALWORKER CHDB500. Clarke METALWORKER CHDB500 13 pages. Heavy duty buffer/polisher
Imprimer la page
USING YOUR BUFFER
WARNING: BEFORE COMMENCING WORK, ENSURE YOU HAVE READ AND
UNDERSTOOD ALL OF THE SAFETY INSTRUCTIONS
1. Plug the buffer into the power supply.
2. Switch the buffer on.
3. Slowly bring the workpiece into
contact with the buffing/polishing
mop.
• See the image on the right to
determine the safest and best
position for contact with the
mop.
• DO NOT contact the mop
outside of the quadrant.
4. After use, unplug the buffer from the power supply and clean ready for next
use.
MAINTENANCE
WARNING: MAKE SURE THAT THE BUFFER IS UNPLUGGED FROM THE MAINS
POWER SUPPLY BEFORE PERFORMING ANY MAINTENANCE.
1. Regularly inspect the buffing mop and replace when worn.
2. Keep the buffer clean and dry. DO NOT use abrasives.
3. The motor and bearings are sealed for life and require no maintenance.
CLEANING & STORAGE
1. Clean the exterior the machine if required using a mild detergent or mild
solvent.
2. Never immerse the buffer in water.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
8