Directed Electronics 1000 Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Directed Electronics 1000. Directed Electronics 1000 8 pages. Python code hopping high frequency 6/96 change model 1000 owner's guide

Imprimer la page

Transmitter Channels

Channel I

The arm/disarm and panic functions, are usually controlled by button I.

Channel II

The Silent Mode

™

/trunk release function, is usually controlled by button II.

Silent Mode™ and Remote Valet

second. Trunk release requires you to press button II for 1.5 seconds.

Channel III

(for options)

Usually controlled by pressing buttons I and II at the same time.

These assignments can be changed if needed, such as for two-car operation

from one remote.

Using Your System

Arming

You can turn on, or arm, the system by pressing button I of your transmitter for

one second. When the system arms, you will hear a short siren sound, or

chirp, and see the parking lights flash once. If the vehicle's power door locks

are controlled by the system, the doors will lock.

While the system is armed, the Status LED will flash about twice a second,

showing that the system is actively protecting your vehicle.

If you hear a second chirp after arming and see the Status LED flashes in

groups, see Diagnostics section. This extra chirp is called Bypass Notifica-

tion.

The system also can be programmed to arm itself automatically (called

passive arming). If the system is programmed for passive arming, it will

automatically arm 30 seconds after the ignition is turned off and the system

LED

Channel II

Channel III

work by pressing button II for less than one

The optional Vehicle Recovery System is armed and disarmed using a

hidden push button switch. If the system has been installed, make sure you

are aware of the location of the VRS

Arming the VRS

To arm the VRS

driving or while driving the vehicle. Once the system is armed, it will go into its

triggered sequence (see below) if any door is opened and closed. If you are

forced from the vehicle the system will trigger as the door will be opened and

closed as you leave the vehicle. This is how the system works to combat

intersection carjacking. If ordered from the vehicle, you may press the VRS

button before exiting. Arming prior to that point, however, is highly recom-

mended.

To protect against parking lot carjacking, simply press the VRS

before leaving the vehicle. The system will now trigger automatically the next

time you or anyone drives the vehicle. This helps to protect the vehicle if

someone takes your keys and alarm remote by force in a parking lot.

NOTE: If the VRS

to leaving the vehicle, it remains armed and will trigger the next time the

vehicle is driven.

VRS

Trigger Sequence

Fifteen seconds after the last door has closed, the system's Status LED

will begin flashing. This delay is to allow you to put distance between yourself

and your vehicle in the event of a carjacking.

NOTE: If the system is in Valet

protect your vehicle. However, the Status LED will not provide this

first-level indication if the VRS

Mode.

Forty-five seconds later, the Soft Chirp™ Revenger™ siren will

begin chirping and the parking lights will begin flashing. This time could be

used to notify authorities that your vehicle has been hijacked, and tell them

what the VRS

Fifteen seconds after the siren chirps begin, the siren's output will

G438.696

95G438.PM5

button.

, push the button once. This can be done before

is armed while operating the vehicle and not disarmed prior

Mode, the VRS

triggers with the system in Valet

will do next.

button once

feature will still

G438.696

95G438.PM5