Directed Electronics 3000 Référence rapide Manuel d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Référence rapide Manuel d'installation pour {nom_de_la_catégorie} Directed Electronics 3000. Directed Electronics 3000 2 pages. Remote start system with keyless entry
Également pour Directed Electronics 3000 : Manuel du propriétaire (16 pages)

Imprimer la page

Programming System Features

The System Features Learn Routine dictates how the unit operates. It is possible to access and change most of the

feature settings using the Valet button.

Turn the ignition on, then off.

Select a Menu. Press and hold the Valet button. The number of LED flashes and horn honks indicates the

menu number. A single LED flash and honk indicates menu 1. Two LED flashes and 2 honks indicates menu

When the desired menu LED flashes and honks are heard, release the Valet button.

Select a Feature. Press and release the Valet button the number of times corresponding to the feature you

wish to change. Then press and hold one more time to select the feature. The LED flashes and the horn

honks to indicate which feature is selected.

Program the Feature. While holding the Valet button, Pulse the white/blue H1/4 wire, the LED will turn on

or off indicating the feature setting. If the feature has more than two selections, each time this input is pulsed

the next available setting will be picked. For example if 60 minute runtime is chosen, (Menu 2 feature 2) the

LED flashes 3 times.

If using optional 9474T RF kit

This is the alternative to step 5: Program the Feature. While holding the Valet button, you can program the feature

using the remote control. For features with only two options;

= option 1 while

For features with more than two options;

selects the options in ascending order. The LED flashes and the horn

AUX

honks indicating which option is selected.

AUX

Once a feature is programmed:

•

Other features can be programmed within the same menu

•

Another menu can be selected

•

The learn routine can be exited if programming is complete

To access another feature in the same menu:

Press and release the Valet button the number of times necessary to advance from the feature you just pro-

grammed to the next one you want to program.

Then press the Valet button once more and hold it.

To select another menu:

Press and hold the Valet button.

After 3 seconds, the unit advances to the next menu, the horn honks and LED flashes indicating which menu

has been accessed.

The learn routine exits if any of the following occurs:

•

The ignition is turned On

•

There is no activity for 30 seconds

•

The Valet button is pressed too many times

Bitwriter - Only Options

If programming with the Bitwriter®, the learn routine can be locked or unlocked. If the learn routine has

previously been locked, it must be unlocked with Bitwriter® - this cannot be done manually with the Valet

button.

The Bitwriter®

gives you access to a wider range of system options. These features and the adjustments that

may be programmed are described in the table below.

Menu Item

Feature

Default

Engine Runtime

12 min.

Diesel start type

Off

Diesel start delay time (seconds)

15 sec

Virtual Tach Fine Tune

Not initialized

Remote control programming

Unlocked

Feature Programming

Unlocked

Feature Menus

Default settings are in bold type.

Menu 1

Feature #

Feature

Horn function

Ignition con-

trolled lock

Ignition con-

trolled unlock

Doorlock out-

put duration

Double pulse

unlock

Double pulse

= option 2.

lock

AUX

Factory Alarm

Disarm func-

tion

Factory Alarm

Disarm Pulses

Comfort

Closure

Panic

Menu 2

Feature #

Feature

Engine check-

ing

Engine

Runtime

Park light

output

Cranking time

Activation

pulse count

2nd Ignition

behavior

Accessory

Options

output

2nd Status

1-60 min.

behavior

Timed

Anti-grind

1-90 sec.

0 to 1 second in 50 millisecond

Diesel start

increments

delay

Locked

Timer mode

run time

Locked

Opt. 1

Opt. 2

Opt. 3

Opt.4

Off

Siren

20 mS

30 mS

40 mS

Off

0.8 sec.

3.5 sec.

0.4 sec.

Off

with unlock

Before unlock

Remote start

only

Single

Double

Comfort

Off

Comfort

Closure 1

Closure 2

Off

Opt. 1

Opt. 2

Opt. 3

Opt.4

Virtual tach

voltage

Off

tachometer

12 min

24 min

60 min

Pulsed

Constant

0.6 sec.

0.8 sec.

1.0 sec.

1.2 sec.

1 pulse

2 pulses

3 pulses

Ignition

Accessory

Off during

On during

wait-to-start

Normal

Latch rear

Pulse rear

defogger

Off

Timed 15 sec

Timed 30 sec. Timed 45 sec.

12 min

3 min

6 min

9 min

Optional Remote Programming (for use when adding 9474T Remote Kit)

Turn key to the ON position

Within 5 seconds, press and release Valet button one time.

Within 5 seconds, press and hold the Valet button. The LED will flash one time and the horn honks to confirm

entry into remote programming.

Press the

button on the remote control.

Opt. 5+

The horn honks to confirm the remote has been programmed.

AUX

Release the Valet button, and turn the key to the Off position.

Siren

The horn sounds one long honk to confirm that remote programming has been exited.

50 mS

The programming routine exits if any of the following occurs:

The ignition is turned off

There is no activity for 30 seconds

The Valet button is pressed too many times

Opt. 5+

1.4,

1.6,

1.8,

2.0,

4.0 sec

Bitwriters with a date code of 6a or older require an IC

Directed Logo Usage

upgrade (p/n 998M). Some bitwriters with a date code

of 6B do not require the IC upgrade, refer to tech tip #

1112 for more information.

See full Installation Guide for more

detailed information on this system.

Such information and more can be

found online at:

www.directechs.com

The Bitwriter® (p/n 998U)

requires chip version 2.7 or

newer to program this unit.

Logo, Directed with designed in USA.eps

Logo, Directed Electronics w-driven.eps

QRNADSS4003 2011 -12