Clarke 7230296 Manuel d'utilisation et d'entretien - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke 7230296. Clarke 7230296 17 pages. 560w puddle residue pump
Imprimer la page
4. ALWAYS use an approved cable extension suitable for the power rating of
the pump (see specifications). The conductor size should also be at least
the same size as that on the pump, or larger. When using a cable reel,
always unwind the cable completely.
5. ALWAYS maintain the pump with care and keep it clean.
6. NEVER use for pumping flammable liquids or corrosive chemicals. These
pumps are designed to pump water only.
7. NEVER abuse the electrical cable. Never use the cable for pulling or
unplugging the pump. Damaged or tangled cables increase the risk of
electric shock.
8. NEVER run the pump dry. Always ensure the pump is immersed in water
before starting. Switch the pump OFF immediately WHEN the task is
completed
9. NEVER pump water from a swimming pool when there is a person or animal
still in the pool.
10. NEVER install the pump on sand, silt or mud which is likely to shift or
collapse.
11. NEVER modify this pump in any way. Use it only for the purpose for which it
is designed.
12. NEVER allow the pump to run dry or operate out of the water.
13. Submersible pumps should always be submerged and stored vertically.
14. Disconnect the pump from the mains supply before placing it into or
removing it from the water.
15. NEVER insert your fingers into the pump whilst it is connected to the mains.
16. Keep the pump clear of any sediment by standing it on a platform or brick
or suspending it at a suitable depth.
17. DO NOT use the pump if the water is liable to freeze, as this can cause
damage to the pump. Remove the pump from the water and store it in a
frost free location.
SERVICING & REPAIRS
1. ALWAYS have the pump serviced by your local CLARKE dealer, using only
identical replacement parts. This will ensure the safety of the pump is
maintained. The use of non standard parts could be hazardous.
2. NEVER attempt any repairs yourself unless suitably qualified. If you have a
problem with the pump contact your local CLARKE dealer.
3. ALWAYS disconnect the pump from the electrical supply before placing it
into, or removing from the water, and before any cleaning or
maintenance.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5