Clarke 7230693 Manuel d'utilisation et d'entretien - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke 7230693. Clarke 7230693 13 pages. 250w puddle pump with auto sensor
Imprimer la page
MAINTENANCE
WARNING: BEFORE CHECKING THE CONDITION OF THE PUMP, ENSURE IT
IS UNPLUGGED FROM THE MAINS SUPPLY. IF THE UNIT IS HARD WIRED,
ENSURE THE CIRCUIT BREAKER IS OPEN.
This pump should require no maintenance other than regular cleaning.
If the pump starts to show signs of wear or damage, contact your CLARKE
dealer for advice.
CLEANING
1. Check the pump installation regularly to ensure the water inlet is clear of
leaves or other debris.
2. Take extra care to remove any debris from around the impeller.
NOTE: Do not attempt to repair the pump yourself, as you may damage the
waterproof seal and invalidate your guarantee. Repairs must be
carried out by your CLARKE dealer, or contact the CLARKE Service
Department, on 020 8988 7400.
STORAGE
When the pump is not being used for extended periods, clean and dry it
thoroughly and store in indoors. if the pump is left in water, it must be run at
least once a week to prevent it from seizing up.
SPECIFICATIONS
Voltage
Outlet Thread Diameter
Power
Maximum Head Height
Maximum Depth
Maximum Flow
Maximum Water Temperature
Maximum Particle Size
Weight
Cable Length
Dimensions (D x W x H)
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
230V~50Hz
1½"BSP
250W
6 m
5 m
100 l/min
o
35
C
Clean Water Only
4 kg
10 m
168 x 173 x 260 mm
7