Alemite 585-D1 Manuel d'entretien - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Alemite 585-D1. Alemite 585-D1 9 pages. Cordless grease gun

Imprimer la page

Cordless Grease Gun

General Safety Rules (Continued)

Read all instructions: Failure to follow all instructions listed below may result in electric shock,

fire and/or serious injury. The term "power tool'' in all of the warnings listed below refers to

your mains operated (corded) power tool or battery operated (cordless) power tool.

SAVE THESE INSTRUCTIONS.

Power Tool Use and Care

• • • • Do not force the power tool. Use the correct power tool for your application. The correct

power tool Will do the job better and safer at the rate for which it was designed.

• • • • Do not use the power tool if the switch does not turn it on and off. Any power tool that can

not be controlled with the switch is dangerous and must be repaired.

• • • • Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

• • • • Store idle power tools out of the reach of children and do not allow persons unfamiliar

with the power tool or these instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

• • • • Maintain power tools. Check for misalignment or binding of moving parts, breakage of

parts and any other condition that may affect the power tools operation. If damaged,

have the power tool repaired before use. Many accidents are caused by poorly maintained

power tools.

• • • • Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

• • • • Use the power tool, accessories and tool bits etc., in accordance with these instructions

and in the manner intended for the particular type of power tool, taking into account

the working conditions and the work to be performed. Use of the power tool for operations

different from intended could result in a hazardous situation.

Battery Tool Use and Care

• • • • Recharge only with the charger specified by the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of fire when used with another battery pack.

• • • • Use power tools only with specifically designated battery packs. Use of any other battery

packs may create a risk of injury and fire.

• • • • When battery pack is not in use, keep it away from other metal objects like paper

clips, coins, keys, nails, screws, or other small metal objects that can make a

connection from one terminal to another. Shorting the battery terminals together may cause

burns or a fire.

• • • • Under abusive conditions, liquid may be ejected from the battery; avoid contact. If

contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause irritation or burns.

• • • • Disconnect battery pack from gun before changing accessories, storing gun or

unscrewing grease cylinder from the gun.

• • • • Ensure the switch is in the off position before inserting battery pack. Inserting the battery

pack into power tools that have the switch on invites accidents.

Service

• • • • Have your power tool serviced by a qualified repair person using only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

Alemite, LLC

WARNING

SER 585-A1

Revision (9-09)