Directed Electronics PS-4461TWE-FM Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Directed Electronics PS-4461TWE-FM. Directed Electronics PS-4461TWE-FM 20 pages. Two-way 6-button lcd automatic/manual transmission remote starter

Imprimer la page

Valet Modes

When the vehicle is in Valet Mode, the remote starter functionalities and alarm (if configured) are

disabled. If the vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent

the engine from being remote-started accidentally.

Any of the following features will put your remote car starter into Valet Mode:

Ignition Valet:

This feature allows you to put your system into Valet Mode by

using the ignition key.

Remote valet:

This feature allows you to put your system into Valet Mode by

using the transmitter.

To put the system into Valet Mode

To put the system into Valet mode using the KEY (Ignition Valet Mode):

Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times

successively into the IGNITION/RUN and OFF positions. The parking lights will flash

three times.

Turn the ignition OFF.

The LED on the antenna will come ON solid to indicate that the vehicle has successfully

entered Valet mode.

The

icon will appear on your LCD remote if

To put the system into Valet mode using the TRANSMITTER (Remote Valet Mode):

Press the

and

buttons simultaneously until the

remote.

The LED on the antenna will come ON solid to indicate that the vehicle has successfully

entered Valet mode

To put the system out of Valet Mode

To put the system out of Valet mode using the KEY (Ignition Valet Mode):

Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times

successively into the IGNITION/RUN and OFF positions.

The parking lights will flash twice.

Turn the ignition OFF.

The LED on the antenna will flash quickly to indicate that the vehicle is now out of Valet

mode.

The

icon will disappear on your LCD remote if

To put the system out of Valet mode using the TRANSMITTER (Remote Valet Mode):

Press the

and

buttons simultaneously until the

LCD remote.

The system will warn you if someone attempts to remote start the vehicle while in Valet Mode:

The parking lights will turn ON then OFF; then Flash twice.

Panic Mode

Note: Panic mode can only be activated if the horn has been adequately configured by the

installer.

In an emergency situation, you can activate panic mode by pressing and holding the

button for more than 3 seconds, until the horn starts honking. If the vehicle is under a remote start,

the engine will shutdown automatically before setting off the horn. You can stop the horn by

pressing:

P.12

button is pressed.

icon will appear on your LCD

button is pressed.

icon will disappear from your

User Guide